Mesin Steam Air atau biasa disebut Jet Cleaner adalah Salah satu alat yang dipergunakan dalam usaha Cuci Mobil dan Motor,alat ini dipilih karena memiliki tekanan yang sangat kuat.Dengan menggunakan Jet Cleaner ini proses pembersihan kotoran yang menempel pada mobil maupun motor akan dengan cepat dan mudah dibersihkan
Berikut adalah macam-macam Jet Cleaner sesuai dengan Harga dan Spesifikasinya:
Portable Jet Cleaner
Spek : Motor Capacity:700 Watt,
Max. Pressure : 100 Bar,
Working Flow Rate : 4.6 L/min,
Max. Pressure Water Supply : 4 Bar,
Max. Water Temperature : 50ºC,
Voltage : 220V/50Hz,
Hose Length : 5 mtr,
Dimension (LxWxH): 40x28x28 cm,
Net Weight : 10.00 Kg,
Product Guarantee: 3 Months
Semi Profesional Power Sprayer
Spek: Max Presure : 30-40 bar,
Spraying Pressure : 22-45 Kg/cm2,
Speed : 800–1200 rpm,
WaterSuction : 30–40 ltr/min,
Plunger no. xDiaxStroke: 3x30x20 min,
ELEKTROMOTOR 1 HP
Semi Profesional Power Sprayer + Engine 5,5 HP
Spek: Max Presure : 30-40 bar,
Spraying Pressure : 22-45 Kg/cm2,
Speed : 800–1200 rpm,
WaterSuction : 30–40 ltr/min,
Plunger no. xDiaxStroke: 3x30x20 min
Engine GX 160:(Air-Cooled,4-Stroke,
OHV,Single Cylinder),
Displacement: 163 cm3 (9.9 cu in),
Net Horse Power Output : 3.6kW (4.8HP) at 3.600 rpm,
Net Torque : 10.3 Nm (7.6 lbs ft) at 2.500 rpm,
PTO Shaft Rotation : Counterclockwise (from PTO shaft side,
Ignition System: Transistorized Magneto Ignition,
Starting System : Recoil,
Carburator: Horizontal type Butterfly Valve,
Air Cleaner : Dual Element Type (opt Cyclone type),
Oil Capacity: 0.6 Liters,
Fuel Tank Capacity (liter): 3.1 Liters,
Dimensions (LxWxH): 305x341x318 m
Profesional CNP MultiStage Jet Steam
CDL/CDLF is a vertical non-self priming multistage centrifugal pump with
stainless steel parts, which is driven by a standard TEFC electric motor. The motor output shaft directly connects with the pump shaft through a coupling. The pressure-resistant cylinder and flow passage components are fixed between pump head and inlet and outlet section with stay bolts. The inlet and outlet are located at the bottom of the pump in the same line. Pumps are supplied with companion flanges. Applications: Cooling Car Washing,water system, Municipal water supply and boosting, Domestic water supply, Irrigation, General industrial services, Washing plants, Boiler feed and condensate system, Water treatmentPerformance for CDLF2 pump range:
Max flow rate: 7 m3/h
Max Head: 18m to 232m
Temperature: -15°C - 70°C
Speed: 2900rpm
Power: .37kw to 3kw
Weight: 20kg to 52kg
Inlet/Outlet flange: DN32
Power Phase: Single (M) or Three (T)
Max Head: 18m to 232m
Temperature: -15°C - 70°C
Speed: 2900rpm
Power: .37kw to 3kw
Weight: 20kg to 52kg
Inlet/Outlet flange: DN32
Power Phase: Single (M) or Three (T)
Standard material:
All the parts contact with liquid made of 304 stainless steel, 316 stainless steel on request. The pump head and suction & discharge can be made of cast iron on request. Mechanical seal is Tungsten Carbide/Graphite, other material is available on request.
All the parts contact with liquid made of 304 stainless steel, 316 stainless steel on request. The pump head and suction & discharge can be made of cast iron on request. Mechanical seal is Tungsten Carbide/Graphite, other material is available on request.
Motor:
Full-enclosed air-blast two-pole standard motor
Protection class: IP55
Insulation class: F
Frequency: 50 Hz
Voltage: 220-240V (Single Phase) or 380-415V (Three phase)
Full-enclosed air-blast two-pole standard motor
Protection class: IP55
Insulation class: F
Frequency: 50 Hz
Voltage: 220-240V (Single Phase) or 380-415V (Three phase)
